The Phase Sensitivities for Different Phase-Shift Configurations in an SU(1,1) Interferometer*

Wang Fan; Zhong Wei; Zhou Lan; Sheng Yu-Bo

doi:10.1088/0253-6102/71/12/1435

PDF(969 KB)

Communications in Theoretical Physics ›› 2019, Vol. 71 ›› Issue (12) : 1435-1442. DOI: 10.1088/0253-6102/71/12/1435

Quantum Physics and Quantum Information

The Phase Sensitivities for Different Phase-Shift Configurations in an SU(1,1) Interferometer*

Author information +

History +

Abstract

We theoretically study the phase sensitivities of two different phase-shift configurations in an SU(1,1) interferometer with coherent $\otimes$ squeezed vacuum states. According to quantum Cramér-Rao theorem, we analytically obtain the ultimate phase sensitivities for two types of phase shift accumulating in one- and two-arm. Compared with the case of one-arm phase shift, the model with phase shift encoding in both arms may provide a better sensitivity when the strength of squeezed vacuum state is large enough. Furthermore, we discuss the achievable sensitivities with the homodyne measurement by invoking of error-propagation formula. In addition, we study the effect of internal and outernal photon losses on the phase sensitivity of the SU(1,1) interferometer and find that the unbalanced interferometer is helpful to improve precision even with high external losses.

Key words

SU(11) interferometer / quantum Fisher information / one- and two-arm phase shifts / Homodyne measurement

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

Wang Fan, Zhong Wei, Zhou Lan, et al. The Phase Sensitivities for Different Phase-Shift Configurations in an SU(1,1) Interferometer*[J]. Communications in Theoretical Physics, 2019, 71(12): 1435-1442 https://doi.org/10.1088/0253-6102/71/12/1435

1 Introduction

Quantum metrology aims to obtain the higher sensitivity in parameter estimation using quantum mechanics methods.^[1-4] The physical quantities, e.g. gravitational waves, electric fields, weak magnetic fields, atomic frequencies, are generally transformed into phase shifts which can be accurately measured through interferometric experiments,^[5] i.e., Mach-Zehnder interferometer (MZI). The phase sensitivity in linear optical MZI with classical approaches is limited by shot noise limit (SNL), i.e.,

1 / \sqrt{N}

, where

N

is the average number of photons inside the interferometer. However, more works have shown that the use of entangled state like NOON state^[6] can lead to improved sensitivity in optical-phase measurements. Restricted by Heisenberg's uncertain relationship, the improved sensitivity can beat the SNL and reaching the Heisenberg limit (HL), i.e.,

1 / N

.^[7]

In 1981, Caves et al.^[3] proposed a scheme in optical interferometry that the SNL can be beaten by using coherent

\otimes

squeezed-vacuum light as input. This scheme has been used in gravitational wave detection experiments, for example GEO600^[8] and LIGO.^[9] In 1986, Yurke et al.^[4] proposed another novel nonlinear interferometer, which replaced the 50:50 beam splitter in traditional MZI with active elements of optical parameter amplification (OPA) or four-wave mixing (FWM). They called this nonlinear interferometer as the SU(1,1) interferometer and the linear MZI as the SU(2) interferometer. A series of recent studies have shown that the SU(1,1) interferometer not only improves the phase measurement sensitivity compared with the SU(2) interferometer, but also performs more robust in suppressing detection noise.^[10-12] Recently, Plick et al.^[13] improved the original SU(1,1) interferometer. In their scheme, a strong coherent light beam was added, which solved the problem of the low number of photons of squeezed state prepared by the original scheme, and greatly improved the sensitivity of phase measurement. The SU(1,1) interferometer has been successfully implemented in the experiment.^[14-15] Loss is one of the limit factors in parameter estimation. Recently, Mathieu Manceau et al.^[10] showed that for a given gain of the first parametric amplifier, unbalancing the interferometer by increasing the gain of the second amplifier improves the interferometer properties. In this scheme, one can gain the optimal sensitivity even with the existence of external losses.

Recently, some researches on the phase sensitivity in SU(2) interferometry with two types of phase shift-one-arm and two-arm have been done.^[16-17] The results showed different phase shifts have an important impact on the ultimate precision. Moreover, some relevant researches on one-arm^[18-21] and two-arm^[11,22-23] phase-accumulated SU(1,1) interferometer have been proposed. In Refs. ^[18--19], the authors discussed the achievable sensitivity with homodyne detection and showed it can approach HL for coherent and squeezed vacuum states. As is well known, the fundamental phase sensitivity is set by the quantum Cramér-Rao bound (QCRB). Does the homodyne detection can reach this sensitivity bound in the above scenario? This question has not yet been addressed in Refs. ^[18--19]. Meanwhile, for two-arm phase accumulating case, the fundamental phase sensitivity for a several of probe states was obtained in Refs. ^[22--23], while the discussion about the feasible detection method approaching such sensitivity was missed. In this paper, we make a full analysis of the phase sensitivities in one-arm and two-arm phase-shift accumulating SU(1,1) interferometer by using coherent

\otimes

squeezed vacuum states, and then discuss the achievable sensitivities with the homodyne measurement. By analytically calculating the QFI, we find that the two-arm case shows a better precision with high strength of squeezed vacuum state, when compared with the single-arm case. However, such advantage does not take place in realistic measurement. To clarify this, we derive the achievable sensitivity with homodyne detection by invoking of error-propagation formula. Our results show that the achievable sensitivities are identical in both two phase shift cases. Although they approach HL, they can not saturate the QCRB. Due to photon losses and detector imperfections, the actual measurement sensitivities are often worse than the theoretical results. We further discuss the effects of photon losses on the achievable sensitivities for the two phase shift cases. We finally find that the unbalanced interferometer helps to improve precision for both cases even with high external losses.

This paper is organized as follows. In Sec. 2, we first briefly introduce the standard SU(1,1) interferometer and compute the theoretical phase sensitivities with the different types of phase shift. In. Sec. 3, we explicitly derive the ultimate phase sensitivities by homodyne detection. Moreover, in Sec. 4, we specifically study the SU(1,1) interferometer in the presence of detection noise and internal losses. Finally, the conclusions are given in Sec. 5.

2 The SU(1,1) Interferometer with Two Different Phase Shifts

A standard SU(1,1) interferometer setup consists of two OPAs and a phase shift, as is shown in Fig. 1. The operation of OPA, denoted by

{OPA}_{i}

(

i = 1, 2

), which satisfies the following relations^[4]

a_{1} = a_{0} {cosh} s_{1} - i e^{i ϑ_{1}} b_{0}^{†} \sinh s_{1}, b_{1} = b_{0} {cosh} s_{1} - i e^{i ϑ_{1}} a_{0}^{†} \sinh s_{1},

(1)

where

s_{1}

and

θ_{1}

describe the gain factor and phase of the first OPA.

a_{0} (a_{0}^{†}

) and

b_{0} (b_{0}^{†}

) are the annihilation (creation) operators of the upper and lower input modes of the interferometer, respectively.

Fig. 1 (Color online) SU(1,1) interferometer model with two types of phase shift: one-arm and two-arm. The input state is $| α ⟩ \otimes | ξ ⟩$ . After the first OPA, it accumulates an unknown phase, which is determinated by $U_{θ}$ . Then it goes through the second OPA and a homodyne measurement is performed. The pump field between the two OPAs has a $π$ phase difference.

Full size|PPT slide

Let

| ψ_{i n} ⟩

denote the state entering at the input ports of the interferometer. Here we use coherent

\otimes

squeezed vacuum states, i.e.,

| α ⟩ \otimes | ξ ⟩

as probe state, where

α = | α | e^{i ϑ_{α}}

and

ξ = r e^{i ϑ_{ξ}}

. The phase shift can be expressed by unitary operator

U_{θ} = \exp (- i θ H)

, where

H

denotes the Hermitian generator. In this article, we consider two cases of phase shift operation acting on: (i) One arm, i.e.,

H = a^{†} a

and (ii) both arms, i.e.,

H = (a^{†} a + b^{†} b) / 2

. Then the state at the output ports reads

| ψ_{o u t} ⟩ = {O P A}_{2} U_{θ} {O P A}_{1} | ψ_{i n} ⟩

Theoretically, the phase measurement sensitivity is limited by the quantum Cramér-Rao bound (QCRB), which is one of the most important quantities for both quantum estimation theory and quantum information theory, has been widely studied.^[1-2,24] The lower bound of the QCRB is provided by the inverse of quantum Fisher information (QFI), which depends only on the probe state and phase accumulation. Regardless of the measurement part, the theoretical sensitivity according to the quantum Cramér-Rao theorem satisfies the following inequality

Δ θ_{Q C R B} \geq \frac{1}{\sqrt{υ F}},

(2)

where

F

represents the QFI and

υ

is the times of experiment operations.[1-2,{24}] Generally, such a bound can be reached by the maximum likelihood estimator for sufficiently large

υ

with Bayesian estimation methods.

For pure states

| ψ ⟩

, the QFI of the phase-dependent state

U_{θ} | ψ ⟩

can be represented as

F = 4 ⟨ (Δ H)^{2} ⟩,

where

(Δ H)^{2} = ⟨ H^{2} ⟩ - ⟨ H ⟩^{2}

with averaging over

| ψ ⟩

. In our cases, the QFIs under different phase shift procedures are given

F_{A} = 4 | α |^{2} {cosh}^{4} s_{1} + 2 \sinh^{2} 2 r \sinh^{4} s_{1} + F,

(3)

F_{B} = (| α |^{2} + \frac{1}{2} \sinh^{2} 2 r) {cosh}^{2} 2 s_{1} + F,

(4)

where

F = (| α |^{2} e^{2 r} + \cosh^{2} r) \sinh^{2} 2 s_{1}

and we have derived the optimal phase condition

2 ϑ_{1} - 2 ϑ_{α} - ϑ_{ξ} = 0

under which the QFI get the maximum. Note that such an optimal phase condition is consistent with the phase-matching condition derived by Ref. ^[23].For simplicity, we set

ϑ_{1} = ϑ_{α} = ϑ_{ξ} = 0

in the following.

The mean photons on each arm are given by

n_{i} = ⟨ n_{i} ⟩

(

i = a, b

). Note that

n_{a} = | α |^{2}

and

n_{b} = \sinh^{2} r

, so the total photon number of input state is

N_{0} = n_{a} + n_{b}

. Due to the nonlinear property of OPA, the total number of photons after the

{O P A}_{1}

is enlarged as

N_{t} = (n_{a} + n_{b}) \cosh 2 s_{1} + 2 \sinh^{2} s_{1} .

(5)

One can rewrite the expressions of Eqs. (3) and (4) in terms of

n_{a}

and

n_{b}

. For given fixed

s_{1}

F / N_{t}^{2}

is plotted in Fig. 2. The green dashed line corresponds to the so-called "HL'', i.e.,

Δ θ_{H L} = 1 / N_{t},

which is however not fundamental sensitivity limit when the particle number fluctuating presents.[{25-28}] From Fig. 2, one can see the amount of the QFIs become higher as the

n_{b}

increases for a fixed

N_{0}

. In the other words, one can get higher phase sensitivity by input a squeezed vacuum state with larger strength.

Fig. 2 (Color online) The variation of $F / N_{t}^{2}$ as the function of $n_{a}$ and $n_{b}$ for phase shift in (a) one-arm and (b) two-arms. The gain factor of ${O P A}_{1}$ is $s_{1} = 2$ .

Full size|PPT slide

Next, we compare the theoretical sensitivities for both two types of phase shift according to Eq. (2). The difference of

Δ θ_{Q C R B}^{A} \sqrt{N_{t}} - Δ θ_{Q C R B}^{Θ B} \sqrt{N_{t}}

given by Eqs. (3) and (4) is plotted in Fig. 3(a), as a function of

n_{a}

and

n_{b}

with the gain factor

s_{1} = 1

. The green dashed line represents the two sensitivities are identical. It is shown that the case with phase shift in both arms performs the better sensitivity when the strength of squeezed vacuum state is large enough.

A special case is considered here, we assume that

r = 0

. As shown in Fig. 3(b), the ultimate sensitivities

Δ θ_{Q C R B} \sqrt{N_{t}}

, as a function of strength of coherent state

| α |

, show that the phase shift in one arm can achieve the better sensitivity in this case.

Fig. 3 (Color online) (a) Difference between the sensitivities of the two types of phase shift: $Δ θ_{Q C R B}^{A} \sqrt{N_{t}} - Δ θ_{Q C R B}^{B} \sqrt{N_{t}}$ . The green dashed line represents the amount of QFIs in two cases is equal. (b) Phase sensitivity $Δ θ_{Q C R B} \sqrt{N_{t}}$ as a function of coherent amplitude $| α |$ for $r = 0$ . The blue line is phase shift in one arm, the red line is phase shift in both arms. The gain factor of OPA $_{1}$ is $s_{1} = 1$ .

Full size|PPT slide

3 Achievable Sensitivities by Homodyne Measurement

In this section, we discuss the measurement sensitivity achieved with typical measurement in two types of phase shifts. In general, the phase measurement uncertainty is still retrieved from a simplified error propagation theory, such that

Δ θ = \frac{Δ X}{\sqrt{υ} | \partial ⟨ X ⟩ / \partial θ |},

(6)

where

⟨ X ⟩

denotes the mean value of observable

X

and

Δ X = \sqrt{⟨ X^{2} ⟩ - ⟨ X ⟩^{2}}

is the root-mean-square fluctuation. In our scheme, we perform a homodyne detection on the output

b_{2}

X (ϕ) = \frac{1}{2} (b_{2} + b_{2}^{†}) .

(7)

3.1 Phase Shift In One Arm

We start with phase shift only in the lower arm. As depicted in Fig. 1, homodyne measurement is made on the port

b_{2}

. In this way the total transformation of input-output relations of the interferometer can be described by

a_{2} = μ a_{0} - i ν b_{0}^{†},

(8)

b_{2} = e^{i θ} (μ b_{0} - i ν a_{0}^{†}),

(9)

where

μ = {cosh} s_{1} {cosh} s_{2} e^{- i θ} + \sinh s_{1} \sinh s_{2} e^{i (ϑ_{2} - ϑ_{1})}, ν = \sinh s_{1} {cosh} s_{2} e^{i ϑ_{1}} e^{- i θ} + {cosh} s_{1} \sinh s_{2} e^{i ϑ_{2}},

such that

| μ |^{2} - | ν |^{2} = 1

The SU(1,1) interferometer is typically studied in a balanced configuration in which the second parametric process is set to "undo''what the first parametric process did. Here, we first consider the balanced SU(1,1) interferometer configuration (i.e.,

s_{1} = s_{2} = s

).To satisfy the optimal phase condition given previously, we also set

ϑ_{α} = ϑ_{ξ} = ϑ_{1} = 0

. According to Ref. ^[19], when the phase of the second OPA

ϑ_{2} = π

may provide the maximal achievable sensitivity. Therefore the mean value

⟨ X_{A} ⟩

and the expectation of

X_{A}^{2}

are given by respectively,

⟨ X_{A} ⟩ = - | α | \sinh s c o s h s \sin θ

(10)

⟨ X_{A}^{2} ⟩ = \frac{1}{4} [- \cos 2 θ (\sinh 2 r \sinh^{4} s + \frac{1}{2} | α |^{2} \sinh^{2} 2 s) - \frac{1}{2} \sinh^{2} 2 s \cos θ (e^{- 2 r} + 1) + {cosh}^{4} s (e^{- 2 r} - 1)^{2} + \sinh^{2} 2 s (\frac{1}{2} | α |^{2} + 1) + 2 \sinh^{2} r \sinh^{4} s + 1] .

(11)

Submitting Eqs. (10) and (11) into Eq. (6) yields

Δ θ^{A} = \frac{\sqrt{⟨ X_{A}^{2} ⟩ - (| α | {cosh} s \sinh s \sin θ)^{2}}}{| | α | {cosh} s \sinh s \cos θ |} .

(12)

To approach the "HL'', we need to find the optimal condition of the photon numbers at the input of the SU(1,1) interferometer. In the asymptotic limit

θ \to 0

Δ θ^{A}

reduces to

Δ θ^{Θ A} |_{θ \to 0} = \frac{1}{| α | e^{r} \sinh (2 s)} .

(13)

By using the relationships of

n_{a} = | α |^{2}

and

n_{b} = \sinh^{2} r

, one can rewrite this expression in terms of

n_{a}

and

n_{b}

. Figure 4 is plotted by

N_{t} Δ θ^{A} |_{θ \to 0}

corresponding to

n_{a}

and

n_{b}

from

0

100

. Similar to the MZI,[{29}] the photon numbers in two input ports of the SU(1,1) interferometer also need to balance to approach the optimal sensitivity.^[19]

Fig. 4 (Color online) The sensitivity $N_{t} Δ θ^{A} |_{θ \to 0}$ as a function of $n_{a}$ and $n_{b}$ with coherent state and squeezed vacuum state as the input state. $N_{t}$ is the total photons throughout the model.

Full size|PPT slide

Figure 5(a) is plotted by Eq. (12) to show the ultimate sensitivity with phase shift in the lower arm.

As discussed above, the photon numbers of two input states need to balance, i.e.,

| α | = \sinh r

. As shown in the figure,the minimum of phase sensitivity occurs at

θ = 0

, given by Eq. (13). One can see this sensitivity in a range beats SNL far and approaches HL, which shows the same performance as discussed in Ref. ^[19]. In addition, we compare this result with the QCRB discussed in Sec. 2. We find it is close to QCRB at the optimal point, which means homodyne detection is a sub-optimal measurement in this case.

3.2 Phase Shift In Both Arms

Below we consider the case of phase shift in both arms, which is missed in Ref. ^[22]. In that case, the QFI for coherent and squeezed states was chiefly calculated. Similar to the previous process, we first get the total transform

{\tilde{a}}_{2} = \tilde{μ} a_{0} - i \tilde{ν} b_{0}^{†},

(14)

{\tilde{b}}_{2} = \tilde{μ} b_{0} - i \tilde{ν} a_{0}^{†},

(15)

where

\tilde{μ} = {cosh} s_{1} {cosh} s_{2} e^{- i θ / 2} + \sinh s_{1} \sinh s_{2} e^{i (ϑ_{2} - ϑ_{1})} e^{i θ / 2}, \tilde{ν} = \sinh s_{1} {cosh} s_{2} e^{i ϑ_{1}} e^{- i θ / 2} + {cosh} s_{1} \sinh s_{2} e^{i ϑ_{2}} e^{i θ / 2} .

The phase matching condition is still the

ϑ_{α} = ϑ_{ξ} = ϑ_{1} = 0

. We similarly consider the balanced case (

s_{1} = s_{2} = s

and

θ_{2} = π

). Using the same approach as in case A, the ultimate sensitivity is given by,

Δ θ^{Θ B} = \frac{\sqrt{⟨ X_{B}^{2} ⟩ - (| α | \sinh (2 s) \sin (θ / 2))^{2}}}{| | α | \sinh s {cosh} s \cos (θ / 2) |},

(16)

where

⟨ X_{B}^{2} ⟩ = - \frac{1}{4} \cos θ [\sinh^{2} 2 s (2 | α |^{2} + \sinh^{2} r = + \frac{1}{2} \sinh 2 r + 1) + \sinh 2 r] + \frac{1}{4} (2 \sinh^{2} r + 1) + \frac{1}{4} (2 | α |^{2} + \sinh^{2} r + \frac{1}{2} \sinh 2 r + 1) .

(17)

In the same way, we study the relation between two input ports photon numbers. When

θ = 0

, Eq. (16) reduces to

Δ θ^{B} |_{θ \to 0} = \frac{1}{| α | e^{r} \sinh (2 s)} .

(18)

Interestingly, the optimal sensitivity is still obtained under the condition of

n_{a} = n_{b}

,which satisfies with that in single-arm phase shift case.

Figure 5(b) shows the Eq. (16) as a function of

θ

. These results are very similar to the ones calculated for case A.

θ = 0

is still the optimal condition to achieve the ultimate sensitivity and likewise homodyne detection is still sub-optimal in this case. However, one can see the sensitivity is lower when

θ

is away from zero point.

Fig. 5 (Color online) Log-plots of the phase sensitivities $Δ θ^{A}$ and $Δ θ^{Θ B}$ for both two cases with homodyne measurement (blue line), Eqs. (12) and (16),as a function of $θ$ . The strength of two OPAs is $s = 2$ . The parameters of input state are as follows: $r = 2.5$ , $| α | = \sinh r$ .

Full size|PPT slide

The SNL is gray line and HL is purple line. The QCRB is presented by black line.

4 Effects of Experimental Noises and Unbalanced Scheme

As has been previously pointed out, the phase sensitivity is extremely affected by the photon losses both inside and outside of the interferometer due to the imperfections in the device and defects in the detector. We now turn to the effect of both of two types of losses on the measurement sensitivity in our scheme. Traditionally, photon losses can be modeled by adding an imaginary beam splitter and part of photons are dissipated into the environment when photons pass through, which can be described by

a_{o u t} = \sqrt{T_{i}} a_{i n} + \sqrt{1 - T_{i}} c_{a}, b_{o u t} = \sqrt{T_{i}} b_{i n} + \sqrt{1 - T_{i}} c_{b},

(19)

where

T_{i}

is the efficiency of imaginary beam splitters. As shown in Fig. 6,

T_{1}

and

T_{2}

represent the transmission rates in presence of the internal and external losses respectively.

c_{a}

and

c_{b}

are the annihilation operators of the upper and lower loss modes of the interferometer. Here, we consider losses in both arms and continue to use coherent

\otimes

squeezed vacuum states as input state. Below, we detailly discuss the phase sensitivities achieved by the homodyne detection in the presence of both inside and outside losses separately.

Fig. 6 (Color online) The loss model of SU(1,1) interferometer with homodyne measurement.The internal and external loss can be modeled by imaginary beam splitters.

Full size|PPT slide

4.1 Phase Shift In One Arm

First, we discuss the sensitivity with phase shift in the lower arm under condition of

s_{1} = s_{2} = s

. Then the ultimate sensitivity with homodyne measurement is given by,

Δ θ_{L}^{A} = \sqrt{(Δ θ^{A})^{2} + \frac{[T_{2} (1 - T_{1}) \cosh 2 s + 1 - T_{2}]}{T_{1} T_{2} | α |^{2} \sinh^{2} (2 s) \cos^{2} θ}},

(20)

which is composed of two parts, the first term is the ideal lossless sensitivity given by Eq. (12) and the second is the extra term due to the internal and external losses. When

T_{1}

and

T_{2}

equal to 1, the second term vanishes, and the sensitivity in this case will reduce to the ideal lossless case.

Figures 7(a) and 7(b) show the phase sensitivity

Δ θ_{L}^{A}

given by Eq. (20) in a narrow range close to

0

. In Fig. 7(a), we study the effect of internal losses on the interferometer by setting

T_{2} = 1

(no external losses). As can be seen from this figure, the increase of internal losses degrades the phase sensitivity. When

T_{1} = 0.5

, it is impossible to beat the SNL. As shown in Fig. 7(b), it shows that the effect of the detection efficiency by making

T_{1} = 1

. Compared to Fig. 7(a), one can see that SU(1,1) interferometer with phase shift in one arm shows the better performance in external noise resistance.

Now we study the unbalanced interferometer (

s_{1} \neq s_{2}

) with the existence of internal and external losses. The optimal condition

θ = 0

is considered here. Under this condition, the phase sensitivity is given by

(Δ θ_{U L}^{A})^{2} = \frac{1}{4 | α |^{2} \cosh^{2} s_{1} \sinh^{2} s_{2}} [μ^{2} e^{- 2 r} + μ^{2} - 1 + \frac{T_{2} (1 - T_{1}) \cosh 2 s_{2} + 1 - T_{2}}{T_{1} T_{2}}],

(21)

where

μ = \cosh s_{1} \cosh s_{2} - \sinh s_{1} \sinh s_{2}

Fig. 7 (Color online) Log-plots of phase sensitivities with the existence of internal loss and external loss. (a), (b) Phase sensitivity $Δ θ_{L}^{A}$ as a function of $θ$ in one-arm case. Different color curves represent different values of $T_{1}$ or $T_{2}$ . (c), (d) Phase sensitivity $Δ θ_{L}^{B}$ as a function of $θ$ in two-arm case. The SNL is gray line and HL is purple line. The QCRB is presented by black line. The parameters are as follows: $s = 2$ , $r = 2.5$ and $α = \sinh r$ .

Full size|PPT slide

We keep the parameters of

T_{1}

and

s_{1}

unchanged and study the effect of

s_{2}

on the ultimate sensitivity. Figure 8(a) shows the phase sensitivity

Δ θ_{U L}^{A}

given by Eq. (21), as a function of

s_{2}

for different values of

T_{2}

. It is confirmed that an increase of the second gain factor is helpful to improve precision even with high external losses and the ultimate sensitivity is close to ideal case. Similar results have been observed in Ref. ^[10].

4.2 Phase Shift In Both Arms

Next, we investigate the loss SU(1,1) interferometer with phase shift in both arms. Using the same approach as above, the ultimate sensitivity is given by:

Δ θ_{L}^{B} = \sqrt{(Δ θ^{B})^{2} + \frac{[T_{2} (1 - T_{1}) \cosh 2 s + 1 - T_{2}]}{T_{1} T_{2} | α |^{2} \sinh^{2} (2 s) \cos^{2} (θ / 2)}} .

(22)

As was done before, we separately consider the effect of internal losses and external losses on phase sensitivity in this case. The extra term is very similar to the one calculated for case A. Figures 7(c) and 7(d) are plotted by Eq. (22). As shown in the figure, the phase sensitivities achieved in both cases have the similar performance in noise resistance.

Finally, unbalanced interferometer is considered to study the influence of gain factor

s_{2}

on the phase sensitivity with internal and external losses. In this case, the phase sensitivity is given by

(Δ θ_{U L}^{Θ B})^{2} = \frac{1}{| α |^{2} (\sinh s_{1} \cosh s_{2} + \cosh s_{1} \sinh s_{2})^{2}} [μ^{2} - 1 + μ^{2} e^{- 2 r} + \frac{T_{2} (1 - T_{1}) \cosh 2 s_{2} + 1 - T_{2}}{T_{1} T_{2}}],

(23)

where

μ = \cosh s_{1} \cosh s_{2} - \sinh s_{1} \sinh s_{2}

Figure 8(b) shows Eq. (23) as a function of

s_{2}

, and the result is much similar to the ones calculated for case A. When we introduce noise, an unbalanced interferometer model is good at resisting external loss. No matter what cases of phase shift, an increase of second gain factor

s_{2}

will improve the ultimate sensitivity and finally eliminate the interference of external loss.

Fig. 8 (Color online) Phase sensitivities (a) $Δ θ_{U L}^{A}$ and (b) $Δ θ_{U L}^{B}$ as a function of gain factor $s_{2}$ for various values of the detection efficiency $T_{2}$ in unbalanced SU(1,1) interferometer. The parameters of input state are as follows: $r = 3$ , $α = \sinh r$ . Note that $s_{1} = 1$ and $T_{1} = 0.9$ .

Full size|PPT slide

5 Conclusion

In conclusion, we have studied the phase sensitivities of the SU(1,1) interferometer with two types of phase shift: One-arm and two-arms. For both two cases, we first exactly calculated the theoretical sensitivities for a mixing coherent state and squeezed vacuum state. We found that the sensitivity for two-arm phase shift case may outperform the single-arm case. We also considered the achievable sensitivity with homodyne measurement based on error propagation theory. Interestingly, we found that the achievable sensitivities for the two types of phase shift configuration provide the same sensitivity. It indicates that the advantage of sensitivity enhancement demonstrated above does not occur within practical measurement. Besides, we also showed that the homodyne detection is a sub-optimal measurement which can not saturate the QCRB but approach the HL. Finally, we considered effects of photon losses on the sensitivity of the SU(1,1) interferometer. We found that the achievable sensitivity degrades substantially when the internal and external losses exit. More importantly, in the unbalanced SU(1,1) interferometer, an increase of the gain of second OPA is helpful to resist and even eliminate the external loss for both two phase shift scenarios.

Note added Recently, Ref. ^[23] appeared, which derived a general phase-matching condition for maximal QFI in SU(1,1) interferometers for certain states, such as, coherent and even coherent states, squeezed vacuum and even coherent states, squeezed thermal and even coherent states. In this paper, we consider a different case by injecting a mixing of coherent state and squeezed vacuum state. The previous obtained phase-matching condition is also hold in our case, which can be complementary to applications in Ref. ^[23]. Our results on maximal QFI for two different phase shift configurations and phase sensitivities accessible by homodyne measurement with and without noises, however, are not covered in Ref. ^[23].

References

List( Publishing order | Descend order by publishing year | Descend order by cited within ) Chart analysis

[1]	C. W. Helstrom, Quantum Detection and Estimation The-ory , Academic,New York (1976). Cited in this article [2]

[2]	A. S. Holevo, Probabilistic and Statistical Aspects ofQuantum Theory,American Mathematical Society , Amsterdam(1982). Cited in this article [1]

[3]	C. M. Caves , Phys. Rev. D 23 ( 1981) 1693. Cited in this article [1]

[4]	B. Yurke, S.L McCall ., and J. R. Klauder., Phys. Rev. A33(1986) 4033. https://doi.org/10.1103/physreva.33.4033 https://www.ncbi.nlm.nih.gov/pubmed/9897145 https://www.ncbi.nlm.nih.gov/pubmed/9897145 Cited in this article [3]

[5]

Giovannetti

, S.

Lloyd

, L.

Maccone

, Science 306( 2004) 1330.

https://doi.org/10.1126/science.1104149

https://www.ncbi.nlm.nih.gov/pubmed/15550661

Cited in this article [1] Abstract

Quantum mechanics, through the Heisenberg uncertainty principle, imposes limits on the precision of measurement. Conventional measurement techniques typically fail to reach these limits. Conventional bounds to the precision of measurements such as the shot noise limit or the standard quantum limit are not as fundamental as the Heisenberg limits and can be beaten using quantum strategies that employ "quantum tricks" such as squeezing and entanglement.

[6]	J. P. Dowling , Contemporary Physics 49 ( 2008) 125. Cited in this article [1]

[7]

Giovannetti

, S.

Lloyd

, L.

Maccone

, Phys. Rev.Lett. 96(2006) 010401.

https://doi.org/10.1103/PhysRevLett.96.010401

https://www.ncbi.nlm.nih.gov/pubmed/16486424

Cited in this article [1] Abstract

We point out a general framework that encompasses most cases in which quantum effects enable an increase in precision when estimating a parameter (quantum metrology). The typical quantum precision enhancement is of the order of the square root of the number of times the system is sampled. We prove that this is optimal, and we point out the different strategies (classical and quantum) that permit one to attain this bound.

[8]	B. Willke and P. Aufmuth , Classical and Quantum Gravity19 ( 2002) 1377. Cited in this article [1]

[9]	B. P. Abbott and R. Abbott , Reports on Progress inPhysics 72 ( 2009) 076901. Cited in this article [1]

[10]	M. Manceau, F. Khalili, M. Chekhova , New Journalof Physics 19 ( 2017) 013014. Cited in this article [3]

[11]

S. S.

Szigeti

, R.J

Lewis-Swan

., and S.A.

Haine

, Phys.Rev. Lett. 118(2017) 150401.

https://doi.org/10.1103/PhysRevLett.118.150401

https://www.ncbi.nlm.nih.gov/pubmed/28452550

Cited in this article [1] Abstract

Although SU(1,1) interferometry achieves Heisenberg-limited sensitivities, it suffers from one major drawback: Only those particles outcoupled from the pump mode contribute to the phase measurement. Since the number of particles outcoupled to these "side modes" is typically small, this limits the interferometer's absolute sensitivity. We propose an alternative "pumped-up" approach where all the input particles participate in the phase measurement and show how this can be implemented in spinor Bose-Einstein condensates and hybrid atom-light systems-both of which have experimentally realized SU(1,1) interferometry. We demonstrate that pumped-up schemes are capable of surpassing the shot-noise limit with respect to the total number of input particles and are never worse than conventional SU(1,1) interferometry. Finally, we show that pumped-up schemes continue to excel-both absolutely and in comparison to conventional SU(1,1) interferometry-in the presence of particle losses, poor particle-resolution detection, and noise on the relative phase difference between the two side modes. Pumped-up SU(1,1) interferometry therefore pushes the advantages of conventional SU(1,1) interferometry into the regime of high absolute sensitivity, which is a necessary condition for useful quantum-enhanced devices.

[12]

Manceau

, G.

Leuchs

, F.

Khalili

, M.

Chekhova

, Phys. Rev. Lett. 119(2017) 223604.

https://doi.org/10.1103/PhysRevLett.119.223604

https://www.ncbi.nlm.nih.gov/pubmed/29286807

Cited in this article [1] Abstract

In an unseeded SU(1,1) interferometer composed of two cascaded degenerate parametric amplifiers, with direct detection at the output, we demonstrate a phase sensitivity overcoming the shot noise limit by 2.3 dB. The interferometer is strongly unbalanced, with the parametric gain of the second amplifier exceeding the gain of the first one by a factor of 2, which makes the scheme extremely tolerant to detection losses. We show that by increasing the gain of the second amplifier, the phase supersensitivity of the interferometer can be preserved even with detection losses as high as 80%. This finding can considerably improve the state-of-the-art interferometry, enable sub-shot-noise phase sensitivity in spectral ranges with inefficient detection, and allow extension to quantum imaging.

[13]	W. N. Plick, J. P. Dowling, G. S. Agarwal , New Journalof Physics 12 ( 2010) 083014. Cited in this article [1]

[14]	J. Jing, C. Liu, Z. Zhou, Z. Y. Ou, W. Zhang , AppliedPhysics Letters 99 ( 2011) 011110. Cited in this article [1]

[15]	F. Hudelist, J. Kong, C. Liu , et al., Nature Commun. 5( 2014). Cited in this article [1]

[16]

Jarzyna

and R.

Demkowicz-Dobrzański

, Phys. Rev. A85(2012) 011801.

https://doi.org/10.1103/PhysRevE.85.011801

https://www.ncbi.nlm.nih.gov/pubmed/22400584

Cited in this article [1] Abstract

We have simulated the relative shear motion of both neutral and polyelectrolyte end-grafted polymer brushes using molecular dynamics. The flexible neutral polymer brush is treated as a bead-spring model, and the polyelectrolyte brush is treated the same way except that each bead is charged and there are counterions present to neutralize the charge. We investigated the friction coefficient, monomer density, and brush penetration for both polyelectrolyte and neutral brushes with both equal grafting density and equal normal force under good solvent conditions. We found that polyelectrolyte brushes had a smaller friction coefficient and monomer penetration than neutral polymer brushes with the identical grafting density and chain length, and the polyelectrolyte brushes supported a much higher normal load than the neutral brushes for the same degree of compression. Charged and neutral brushes with their grafting densities chosen so that they support the same load exhibited approximately the same degree of interpenetration, but the polyelectrolyte brush exhibited a significantly lower friction coefficient. We present evidence that the reason for this is that the extra normal force contribution provided by the counterion osmotic pressure that exists for polyelectrolyte brushes permits them to support the same load as an identical neutral polymer brush of higher grafting density. Because of the resulting lower monomer density for the charged brushes, fewer monomer collisions take place per unit time, resulting in a lower friction coefficient.

[17]

Takeoka

, K. P.

Seshadreesan

, C.

You

, et al., Phys.Rev. A 96 ( 2017) 052118.

https://doi.org/10.1103/PhysRevE.96.052118

https://www.ncbi.nlm.nih.gov/pubmed/29347714

Cited in this article [1] Abstract

We consider a class of either fermionic or bosonic noninteracting open quantum chains driven by dissipative interactions at the boundaries and study the interplay of coherent transport and dissipative processes, such as bulk dephasing and diffusion. Starting from the microscopic formulation, we show that the dynamics on large scales can be described in terms of fluctuating hydrodynamics. This is an important simplification as it allows us to apply the methods of macroscopic fluctuation theory to compute the large deviation (LD) statistics of time-integrated currents. In particular, this permits us to show that fermionic open chains display a third-order dynamical phase transition in LD functions. We show that this transition is manifested in a singular change in the structure of trajectories: while typical trajectories are diffusive, rare trajectories associated with atypical currents are ballistic and hyperuniform in their spatial structure. We confirm these results by numerically simulating ensembles of rare trajectories via the cloning method, and by exact numerical diagonalization of the microscopic quantum generator.

[18]	H. Ma, D. Li, C. H. Yuan , et al., Phys. Rev. A 92 ( 2015) 023847. Cited in this article [3]

[19]	D. Li, C. H. Yuan, Z. Y. Ou , et al., New Journal of Physics16 ( 2014) 073020. Cited in this article [5]

[20]	X. Y. Hu, C. P.Wei, Y. F. Yu, Z. M. Zhang , Frontiersof Physics 11 ( 2016) 114203.

[21]

L. L.

Guo

, Y. F.

, Z. M.

Zhang

, Opt. Express 26( 2018) 29099.

https://doi.org/10.1364/OE.26.029099

https://www.ncbi.nlm.nih.gov/pubmed/30470076

Cited in this article [1] Abstract

We study the phase sensitivity of an SU(1,1) interferometer from two aspects, i.e., the phase estimation determined by the error propagation formula and that by the quantum Cramér-Rao bound (QCRB). The results show that the phase sensitivity by using the intensity detection reaches the sub-shot-noise limit with a coherent state and an m-photon-added squeezed vacuum state (m-PA-SVS) as inputs. The phase sensitivity gradually approaches the Heisenberg limit for increasing m, and the ultimate phase precision improves with the increase of m. In addition, the QCRB can be saturated by the intensity detection with inputting the m-PA-SVS.

[22]	Q. K. Gong, X. L. Hu, D. Li , et al., Phys. Rev. A 96( 2017) 033809. Cited in this article [3]

[23]	X. Xiao, H. B. Liang, G. L. Li, X. G.Wang , Commun.Theor. Phys. 71(2019) 037. Cited in this article [6]

[24]	S.L Braunstein . and C. M. Caves, Phys. Rev. Lett. 72(1994) 3439. https://doi.org/10.1103/PhysRevLett.72.3439 https://www.ncbi.nlm.nih.gov/pubmed/10056200 https://www.ncbi.nlm.nih.gov/pubmed/10056200 Cited in this article [1]

[25]

P. M.

Anisimov

, G. M.

Raterman

, A.

Chiruvelli

, et al., Phys. Rev.Lett. 104(2010) 103602.

https://doi.org/10.1103/PhysRevLett.104.103602

https://www.ncbi.nlm.nih.gov/pubmed/20366424

Abstract

We study the sensitivity and resolution of phase measurement in a Mach-Zehnder interferometer with two-mode squeezed vacuum (n photons on average). We show that superresolution and sub-Heisenberg sensitivity is obtained with parity detection. In particular, in our setup, dependence of the signal on the phase evolves n times faster than in traditional schemes, and uncertainty in the phase estimation is better than 1/n, and we saturate the quantum Cramer-Rao bound.

[26]	H. F. Hofmann , Phys. Rev. A 79 ( 2009) 033822.

[27]

Hyllus

, L.

Pezz′e

, A.

Smerzi

, Phys. Rev. Lett. 105(2010) 120501.

https://doi.org/10.1103/PhysRevLett.105.120501

https://www.ncbi.nlm.nih.gov/pubmed/20867618

Abstract

The concepts of separability, entanglement, spin squeezing, and the Heisenberg limit are central in the theory of quantum-enhanced metrology. In the current literature, these are well established only in the case of linear interferometers operating with input quantum states of a known fixed number of particles. This manuscript generalizes these concepts and extends the quantum phase estimation theory by taking into account classical and quantum fluctuations of the particle number. Our analysis concerns most of the current experiments on precision measurements where the number of particles is known only on average.

[28]	Y. R. Zhang, G. R. Jin, J. P. Cao , et al., J. Phys. A 46( 2012) 035302.

[29]	L. Pezz′e and A. Smerzi, Phys. Rev. Lett. 100(2008) 073601. https://doi.org/10.1103/PhysRevLett.100.073601 https://link.aps.org/doi/10.1103/PhysRevLett.100.073601

Funding

*Supported by the National Natural Science Foundation of China under Grant(Nos. 11747161)

Supported by the National Natural Science Foundation of China under Grant(11974189)

the China Postdoctoral Science Foundation under Grant(No. 2018M642293)

RIGHTS & PERMISSIONS

PDF(969 KB)

264

Accesses

Citation

Detail

Sections

Recommended

Abstract
Key words
Cite this article
1 Introduction
2 The SU(1,1) Interferometer with Two Different Phase Shifts
Fig. 1 (Color online) SU(1,1) interferometer model with two types of phase shift: one-arm and two-arm. The input state is $| α ⟩ \otimes | ξ ⟩$ . After the first OPA, it accumulates an unknown phase, which is determinated by $U_{θ}$ . Then it goes through the second OPA and a homodyne measurement is performed. The pump field between the two OPAs has a $π$ phase difference.
Fig. 2 (Color online) The variation of $F / N_{t}^{2}$ as the function of $n_{a}$ and $n_{b}$ for phase shift in (a) one-arm and (b) two-arms. The gain factor of ${O P A}_{1}$ is $s_{1} = 2$ .
Fig. 3 (Color online) (a) Difference between the sensitivities of the two types of phase shift: $Δ θ_{Q C R B}^{A} \sqrt{N_{t}} - Δ θ_{Q C R B}^{B} \sqrt{N_{t}}$ . The green dashed line represents the amount of QFIs in two cases is equal. (b) Phase sensitivity $Δ θ_{Q C R B} \sqrt{N_{t}}$ as a function of coherent amplitude $| α |$ for $r = 0$ . The blue line is phase shift in one arm, the red line is phase shift in both arms. The gain factor of OPA $_{1}$ is $s_{1} = 1$ .
3 Achievable Sensitivities by Homodyne Measurement
3.1 Phase Shift In One Arm
Fig. 4 (Color online) The sensitivity $N_{t} Δ θ^{A} |_{θ \to 0}$ as a function of $n_{a}$ and $n_{b}$ with coherent state and squeezed vacuum state as the input state. $N_{t}$ is the total photons throughout the model.
3.2 Phase Shift In Both Arms
Fig. 5 (Color online) Log-plots of the phase sensitivities $Δ θ^{A}$ and $Δ θ^{Θ B}$ for both two cases with homodyne measurement (blue line), Eqs. (12) and (16),as a function of $θ$ . The strength of two OPAs is $s = 2$ . The parameters of input state are as follows: $r = 2.5$ , $| α | = \sinh r$ .
4 Effects of Experimental Noises and Unbalanced Scheme
Fig. 6 (Color online) The loss model of SU(1,1) interferometer with homodyne measurement.The internal and external loss can be modeled by imaginary beam splitters.
4.1 Phase Shift In One Arm
Fig. 7 (Color online) Log-plots of phase sensitivities with the existence of internal loss and external loss. (a), (b) Phase sensitivity $Δ θ_{L}^{A}$ as a function of $θ$ in one-arm case. Different color curves represent different values of $T_{1}$ or $T_{2}$ . (c), (d) Phase sensitivity $Δ θ_{L}^{B}$ as a function of $θ$ in two-arm case. The SNL is gray line and HL is purple line. The QCRB is presented by black line. The parameters are as follows: $s = 2$ , $r = 2.5$ and $α = \sinh r$ .
4.2 Phase Shift In Both Arms
Fig. 8 (Color online) Phase sensitivities (a) $Δ θ_{U L}^{A}$ and (b) $Δ θ_{U L}^{B}$ as a function of gain factor $s_{2}$ for various values of the detection efficiency $T_{2}$ in unbalanced SU(1,1) interferometer. The parameters of input state are as follows: $r = 3$ , $α = \sinh r$ . Note that $s_{1} = 1$ and $T_{1} = 0.9$ .
5 Conclusion
References
Funding
RIGHTS & PERMISSIONS

Received	Published
2019-06-05	2019-12-01
Issue Date
2019-12-05

Please choose a citation manager

Content to export

Abstract

Key words

Cite this article

1 Introduction

2 The SU(1,1) Interferometer with Two Different Phase Shifts

Fig. 2 (Color online) The variation of $F / N_{t}^{2}$ as the function of $n_{a}$ and $n_{b}$ for phase shift in (a) one-arm and (b) two-arms. The gain factor of ${O P A}_{1}$ is $s_{1} = 2$ .

3 Achievable Sensitivities by Homodyne Measurement

3.1 Phase Shift In One Arm

Fig. 4 (Color online) The sensitivity $N_{t} Δ θ^{A} |_{θ \to 0}$ as a function of $n_{a}$ and $n_{b}$ with coherent state and squeezed vacuum state as the input state. $N_{t}$ is the total photons throughout the model.

3.2 Phase Shift In Both Arms

4 Effects of Experimental Noises and Unbalanced Scheme

Fig. 6 (Color online) The loss model of SU(1,1) interferometer with homodyne measurement.The internal and external loss can be modeled by imaginary beam splitters.

4.1 Phase Shift In One Arm

4.2 Phase Shift In Both Arms

5 Conclusion

{{custom_sec.title}}

{{custom_sec.title}}

References

{{custom_fnGroup.title_en}}

Footnotes

Funding

RIGHTS & PERMISSIONS

模态框（Modal）标题

Please choose a citation manager

Content to export

Abstract

Key words

Cite this article

1 Introduction

2 The SU(1,1) Interferometer with Two Different Phase Shifts

Fig. 2 (Color online) The variation of F/Nt2 as the function of na and nb for phase shift in (a) one-arm and (b) two-arms. The gain factor of OPA1 is s1=2.

3 Achievable Sensitivities by Homodyne Measurement

3.1 Phase Shift In One Arm

Fig. 4 (Color online) The sensitivity NtΔθA|θ→0 as a function of na and nb with coherent state and squeezed vacuum state as the input state.Nt is the total photons throughout the model.

3.2 Phase Shift In Both Arms

Fig. 5 (Color online) Log-plots of the phase sensitivities ΔθA and ΔθΘB for both two cases with homodyne measurement (blue line), Eqs. (12) and (16),as a function of θ. The strength of two OPAs is s=2. The parameters of input state are as follows: r=2.5, |α|=sinh⁡r.

4 Effects of Experimental Noises and Unbalanced Scheme

Fig. 6 (Color online) The loss model of SU(1,1) interferometer with homodyne measurement.The internal and external loss can be modeled by imaginary beam splitters.

4.1 Phase Shift In One Arm

4.2 Phase Shift In Both Arms

Fig. 8 (Color online) Phase sensitivities (a) ΔθULA and (b) ΔθULB as a function of gain factor s2 for various values of the detection efficiency T2 in unbalanced SU(1,1) interferometer. The parameters of input state are as follows: r=3, α=sinh⁡r. Note that s1=1 and T1=0.9.

5 Conclusion

{{custom_sec.title}}

{{custom_sec.title}}

References

{{custom_fnGroup.title_en}}

Footnotes

Funding

RIGHTS & PERMISSIONS

Fig. 2 (Color online) The variation of $F / N_{t}^{2}$ as the function of $n_{a}$ and $n_{b}$ for phase shift in (a) one-arm and (b) two-arms. The gain factor of ${O P A}_{1}$ is $s_{1} = 2$ .

Fig. 4 (Color online) The sensitivity $N_{t} Δ θ^{A} |_{θ \to 0}$ as a function of $n_{a}$ and $n_{b}$ with coherent state and squeezed vacuum state as the input state. $N_{t}$ is the total photons throughout the model.